2.31a,2.31,2.30 crash on start up on powerbook g3

General discussion about the development of the open source Blender

Moderators: jesterKing, stiv

Post Reply
Crasty
Posts: 4
Joined: Wed Oct 16, 2002 5:41 pm

2.31a,2.31,2.30 crash on start up on powerbook g3

Post by Crasty » Tue Dec 16, 2003 1:31 am

is anyone using any of these versions of blender 2.31a,2.31,2.30 on a wallstreet powerbook?

any version since 2.30 has crashed at startup. I know my laptop has only 4 mb for video ram - 2.28c works fine on the same laptop - so has the new GUI interface introduced in 2.30 demand more video ram?

sys.specs:

os 10.2.8
233 mhz wallstreet power book
386 ram
ati rage 4 ram
10 gig hd

and if this helps here is the crash log:

Date/Time: 2003-12-12 17:26:18 -0800
OS Version: 10.2.8 (Build 6R73)
Host: Bill.local.

Command: blender
PID: 964

Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_INVALID_ADDRESS (0x0001) at 0xb15e9940

Thread 0 Crashed:
#0 0x01b6b888 in glrSetFunctions
#1 0x01a3fa08 in gldDestroyShared
#2 0x0193c3e8 in 0x193c3e8
#3 0x0008dc8c in sdrawline (crt.c:300)
#4 0x00009fac in draw_area_emboss (crt.c:300)
#5 0x0006bb8c in drawinfospace (crt.c:300)
#6 0x0008ca30 in scrarea_do_windraw (crt.c:300)
#7 0x00005230 in scrarea_dispatch_events (crt.c:300)
#8 0x00005e18 in screen_dispatch_events (crt.c:300)
#9 0x00006414 in screenmain (crt.c:300)
#10 0x000037b4 in main (crt.c:300)
#11 0x00002984 in _start (crt.c:267)
#12 0x00002804 in start

PPC Thread State:
srr0: 0x01b6b888 srr1: 0x0000f030 vrsave: 0x00000000
xer: 0x00000000 lr: 0x01b6af38 ctr: 0x01b6af18 mq: 0x00000000
r0: 0x00000000 r1: 0xbffff6f0 r2: 0x88042244 r3: 0x00000000
r4: 0x000002ac r5: 0x01bb5020 r6: 0x01bb5120 r7: 0x00000000
r8: 0x00000000 r9: 0x01bb1f14 r10: 0x00000000 r11: 0xfffff940
r12: 0x01b6af18 r13: 0x01a5c580 r14: 0x00000000 r15: 0x00006060
r16: 0x0000ffff r17: 0x0000ffff r18: 0x0000ffff r19: 0x00005ef0
r20: 0x00000350 r21: 0x28042222 r22: 0x000024a0 r23: 0xfffffcaf
r24: 0x1fffffe0 r25: 0x018042b0 r26: 0x000002ac r27: 0x00000000
r28: 0x01bb5120 r29: 0x01bb5120 r30: 0xb15e9940 r31: 0x01b6af38

ton
Site Admin
Posts: 350
Joined: Wed Oct 16, 2002 12:13 am
Contact:

Post by ton » Tue Dec 16, 2003 4:04 pm

Hi,

4 Mb of VRAM is far below the limit to use Blender. It requires 8 Meg
at least, and run in 1000s of colors then. Even 16 Mb is low, only with
32 Mb you get the fun of 3D opengl on a Mac.

Our problem is that OSX manages opengl memory, OSX uses itself opengl a lot, and just crashes another application when there's no memory available. We are still looking for a reliable method to detect this at startup, and give users a warning.

-Ton-

Post Reply