Problem with ZOOM 2.40

The interface, modeling, 3d editing tools, import/export, feature requests, etc

Moderators: jesterKing, stiv

Post Reply
enriq766
Posts: 13
Joined: Wed Nov 20, 2002 6:12 am
Contact:

Problem with ZOOM 2.40

Post by enriq766 »

When I look thru the camera and press "G" then "Z" it does not move the camera.

But if I press "G" "Z" "G" "Z" it works. Its says its in the Z axis the first time..but it does nothing.

This is while looking thru the camera only.

Caronte
Posts: 76
Joined: Wed Oct 16, 2002 12:53 am
Location: Valencia-Spain-Europe

Post by Caronte »

You can use G + MMB :wink:
Caronte.
"Some Day, All Will Be Digital"
http://www.nicodigital.com

UncleZeiv
Posts: 0
Joined: Mon Aug 29, 2005 1:11 pm

Post by UncleZeiv »

Experiencing the same problem here but not always, I can't reproduce reliably.

LetterRip
Posts: 0
Joined: Thu Mar 25, 2004 7:03 am

Post by LetterRip »

report is in the tracker - was known about before the release, but apparently theeth didn't have time to check it...

LetterRip

Post Reply